YYQ-1000 Belt Drive Dynamic Balancing Machine | Shenke
Balance rotors up to 1000 kg without marking the shaft surface: belt drive transmission, Ø1600 mm workpiece diameter and a 4 kW variable-speed motor for fan and motor rotor workshops.
The YYQ-1000 is a belt drive dynamic balancing machine for shaft-type rotors up to 1000 kg, with a maximum workpiece diameter of Ø1600 mm. Its 160–1780 mm height range and Ø35–200 mm journal capacity on the roller carriages let one machine cover a spread of medium and large rotors, so workshops balancing more than one product line do not need a separate machine per size.
The rotor is driven by a belt wrapped around its own diameter, Ø40–700 mm on this model, so nothing has to be coupled to the shaft end. Machined journals and bearing seats stay untouched, and no coupling alignment is needed before a run. A 4 kW variable-frequency motor allows the balancing speed to follow the workpiece instead of forcing the workpiece to match a fixed drive speed.
The stated measurement performance is ≤0.5 g·mm/kg minimum achievable residual unbalance with a 90% unbalance reduction ratio — the working range most fan, motor, pump and roller rebuilders need before final assembly.
Typical work includes fan impellers, motor rotors, pump rotors, rollers and comparable cylindrical parts. If you are comparing dynamic balancing machines across capacity classes, YYQ-1000 marks the point where belt drive still makes practical sense before rotor mass pushes you toward another drive and support arrangement. Our rotor balancing solutions team can confirm whether your workpiece fits the 1000 kg and Ø1600 mm envelope, and the balancing technical guide explains how capacity, speed and accuracy interact.
Related products
-
This is multifunctional small plastic pelletizing line. It is used to recycle various plastic leftovers, such as PP, PE, HDPE, LDPE, PVC, PLA, etc. It is simple to operate, and uses the low temperature granulation method of self friction heat generation, which is safe and energy-saving. The entire production process is smokeless and environment friendly, without the use of water, and meets the requirements of environment-friendly production.
-
The reverse osmosis equipment passes the raw water through fine filters, granular activated carbon filters, compressed activated carbon filters, etc., and then pressurizes it through a pump, using a p
-
Plastic Pelletizing Line is applicable to the rapid granulation of PE, PP, LDPF, HDPE Film, Bags, Bottles and other plastic raw materials and wastes. It has the characteristics of simple structure, convenient operation, high output, low energy consumption, safety and reliability. The output of our granulator ranges from 100 kg to 1000 kg per hour. Our machines can be customized according to your requirements.
-
High speed optimization Timber cutting optimizing Cross-cut saw and precision cutting
Automation production line. -
The oxygen rich side blown molten pool melting furnace is an efficient and energy-saving steel melting equipment. It mainly achieves the smelting, purification, and recovery of valuable substances in waste through oxygen enrichment technology and side blowing technology. Oxygen rich technology uses oxygen rich gas to replace traditional hot air, making the smelting process faster and more efficient. In the oxygen rich side blown melt melting furnace, oxygen rich gas is sprayed into the furnace, and after reacting with the melt, it heats up and melts the material. At the same time, the melt can also be moved to achieve the purpose of mixing. Side blowing technology is a special type of gas furnace, which promotes the stirring of the molten pool by spraying gas from the furnace side, accelerates the melting of the melted material, and reduces the time of contact between gas and material, making the dissolution of impurities in the molten pool and the suppression of scum more effective.
Reviews
There are no reviews yet.